View M48Z35AV-10MH6TR_6881396.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1/21 march 2004 m48z35ay m48z35av 5.0 or 3.3v, 256 kbit (32 kbit x8) zeropower ? sram features summary integrated, ultra low power sram, power-fail control circuit, and battery read cycle time equals write cycle time battery low flag (bok ) automatic power-fail chip deselect and write protection write protect voltages: (v pfd = power-fail deselect voltage) ? m48z35ay: 4.2v v pfd 4.5v ? m48z35av: 2.7v v pfd 3.0v self-contained battery in the caphat? dip package packaging includes a 28-lead soic and snaphat ? top (to be ordered separately) pin and function compatible with jedec standard 32k x 8 srams soic package provides direct connection for a snaphat top which contains the battery figure 1. 28-pin, caphat? dip package figure 2. 28-pin soic package pcdip28 (pc) battery caphat 28 1 snaphat (sh) battery soh28 (mh) 28 1
m48z35ay, m48z35av 2/21 table of contents features summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 figure 1. 28-pin, caphat? dip package. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 figure 2. 28-pin soic package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 summary description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 figure 3. logic diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 table 1. signal names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 figure 4. dip connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 figure 5. soic connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 figure 6. block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 operating modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 table 2. operating modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 read mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 figure 7. read mode ac waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 table 3. read mode ac characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 write mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 figure 8. write enable controlled, write mode ac waveforms. . . . . . . . . . . . . . . . . . . . . . . . . 7 figure 9. chip enable controlled, write mode ac waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 table 4. write mode ac characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 data retention mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 figure 10.bok check routine example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 v cc noise and negative going transients. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 figure 11.supply voltage protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 maximum rating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 table 5. absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 dc and ac parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 table 6. operating and ac measurement conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 figure 12.ac measurement load circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 table 7. capacitance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 table 8. dc characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 figure 13.power down/up mode ac waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 table 9. power down/up ac characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 table 10. power down/up trip points dc characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 package mechanical information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 figure 14.pcdip28 ? 28-pin plastic dip, battery caphat?, package outline . . . . . . . . . . . . . . 15 table 11. pmdip28 ? 28-pin plastic dip, battery caphat?, package mechanical data. . . . . . . 15 figure 15.soh28 ? 28-lead plastic small outline, battery snaphat, package outline . . . . . . . . 16 table 12. soh28 ? 28-lead plastic small outline, battery snaphat, package mechanical data 16 figure 16.sh ? 4-pin snaphat housing for 48mah battery, package outline . . . . . . . . . . . . . . . 17
3/21 m48z35ay, m48z35av table 13. sh ? 4-pin snaphat housing for 48mah battery, package mechanical data . . . . . . . 17 figure 17.sh ? 4-pin snaphat housing for 120mah battery, package outline . . . . . . . . . . . . . . 18 table 14. sh ? 4-pin snaphat housing for 120 mah battery, package mechanical data. . . . . . 18 part numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 table 15. ordering information scheme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 9 table 16. snaphat battery table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 revision history. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 table 17. revision history. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
m48z35ay, m48z35av 4/21 summary description the m48z35ay/v zeropower ? ram is a 32 kbit x 8, non-volatile static ram that integrates power-fail deselect circuitry and battery control logic on a single die. the monolithic chip is avail- able in two special packages to provide a highly in- tegrated battery backed-up memory solution. the m48z35ay/v is a non-volatile pin and func- tion equivalent to any jedec standard 32k x8 sram. it also easily fits into many rom, eprom, and eeprom sockets, providing the non-volatility of proms without any requirement for special write timing or limitations on the number of writes that can be performed. the 28 pin 600mil dip caphat? houses the m48z35ay/v silicon with a long life lithium button cell in a single pack- age. the 28-pin, 330mil soic provides sockets with gold plated contacts at both ends for direct con- nection to a separate snaphat ? housing con- taining the battery. the unique design allows the snaphat battery package to be mounted on top of the soic package after the completion of the surface mount process. insertion of the snaphat housing after reflow prevents potential battery damage due to the high temperatures required for device surface-mounting. the snaphat housing is keyed to prevent reverse insertion. the soic and battery packages are shipped sep- arately in plastic anti-static tubes or in tape & reel form. for the 28-lead soic, the battery package (e.g., snaphat) part number is ?m4z28-br00sh1.? figure 3. logic diagram table 1. signal names ai02781b 15 a0-a14 w dq0-dq7 v cc m48z35ay m48z35av g v ss 8 e a0-a14 address inputs dq0-dq7 data inputs / outputs e chip enable input g output enable input w write enable input v cc supply voltage v ss ground
5/21 m48z35ay, m48z35av figure 4. dip connections figure 5. soic connections figure 6. block diagram a1 a0 dq0 a7 a4 a3 a2 a6 a5 a13 a10 a8 a9 dq7 w a11 g e dq5 dq1 dq2 dq3 v ss dq4 dq6 a12 a14 v cc ai02782b m48z35ay m48z35av 8 1 2 3 4 5 6 7 9 10 11 12 13 14 16 15 28 27 26 25 24 23 22 21 20 19 18 17 ai02783 8 2 3 4 5 6 7 9 10 11 12 13 14 22 21 20 19 18 17 16 15 28 27 26 25 24 23 1 a1 a0 dq0 a7 a4 a3 a2 a6 a5 a13 a10 a8 a9 dq7 w a11 g e dq5 dq1 dq2 dq3 v ss dq4 dq6 a12 a14 v cc m48z35ay m48z35av ai01619b lithium cell v pfd v cc v ss voltage sense and switching circuitry 32k x 8 sram array a0-a14 dq0-dq7 e w g power
m48z35ay, m48z35av 6/21 operating modes the m48z35ay/v also has its own power-fail de- tect circuit. the control circuitry constantly moni- tors the single power supply for an out of tolerance condition. when v cc is out of tolerance, the circuit write protects the sram, providing a high degree of data security in the midst of unpredictable sys- tem operation brought on by low v cc . as v cc falls below approximately v so , the control circuitry con- nects the battery which maintains data until valid power returns. table 2. operating modes note: x = v ih or v il ; v so = battery back-up switchover voltage. 1. see table 10., page 14 for details. read mode the m48z35ay/v is in the read mode whenever w (write enable) is high, e (chip enable) is low. the device architecture allows ripple-through ac- cess of data from eight of 264,144 locations in the static storage array. thus, the unique address specified by the 15 address inputs defines which one of the 32,768 bytes of data is to be accessed. valid data will be available at the data i/o pins within address access time (t avqv ) after the last address input signal is stable, providing that the e and g access times are also satisfied. if the e and g access times are not met, valid data will be available after the latter of the chip enable access time (t elqv ) or output enable access time (t glqv ). the state of the eight three-state data i/o signals is controlled by e and g . if the outputs are activat- ed before t avqv , the data lines will be driven to an indeterminate state until t avqv . if the address in- puts are changed while e and g remain active, output data will remain valid for output data hold time (t axqx ) but will go indeterminate until the next address access. figure 7. read mode ac waveforms note: write enable (w ) = high. mode v cc e g w dq0-dq7 power deselect 4.5 to 5.5v or 3.0 to 3.6v v ih x x high z standby write v il x v il d in active read v il v il v ih d out active read v il v ih v ih high z active deselect v so to v pfd (min) (1) x x x high z cmos standby deselect v so (1) x x x high z battery back-up mode ai00925 tavav tavqv taxqx telqv telqx tehqz tglqv tglqx tghqz valid a0-a14 e g dq0-dq7 valid
7/21 m48z35ay, m48z35av table 3. read mode ac characteristics note: 1. valid for ambient operating temperature: t a = 0 to 70c or ?40 to 85c; v cc = 4.5 to 5.5v or 3.0 to 3.6v (except where noted). 2. c l = 5pf (see figure 12., page 12 ). write mode the m48z35ay/v is in the write mode whenev- er w and e are low. the start of a write is refer- enced from the latter occurring falling edge of w or e . a write is terminated by the earlier rising edge of w or e . the addresses must be held valid throughout the cycle. e or w must return high for a minimum of t ehax from chip enable or t whax from write enable prior to the initiation of anoth- er read or write cycle. data-in must be valid t d- vwh prior to the end of write and remain valid for t whdx afterward. g should be kept high during write cycles to avoid bus contention; although, if the output bus has been activated by a low on e and g , a low on w will disable the outputs t wlqz after w falls. figure 8. write enable controlled, write mode ac waveforms symbol parameter (1) m48z35ay m48z35av unit ?70 ?100 min max min max t avav read cycle time 70 100 ns t av qv address valid to output valid 70 100 ns t elqv chip enable low to output valid 70 100 ns t glqv output enable low to output valid 35 50 ns t elqx (2) chip enable low to output transition 5 10 ns t glqx (2) output enable low to output transition 5 5 ns t ehqz (2) chip enable high to output hi-z 25 50 ns t ghqz (2) output enable high to output hi-z 25 40 ns t axqx address transition to output transition 10 10 ns ai00926 tavav twhax tdvwh data input a0-a14 e w dq0-dq7 valid tavwh tavel twlwh tavwl twlqz twhdx twhqx
m48z35ay, m48z35av 8/21 figure 9. chip enable controlled, write mode ac waveforms table 4. write mode ac characteristics note: 1. valid for ambient operating temperature: t a = 0 to 70c or ?40 to 85c; v cc = 4.5 to 5.5v or 3.0 to 3.6v (except where noted). 2. c l = 5pf (see figure 12., page 12 ). 3. if e goes low simultaneously with w going low, the outputs remain in the high impedance state. symbol parameter (1) m48z35ay m48z35av unit ?70 ?100 min max min max t avav write cycle time 70 100 ns t avwl address valid to write enable low 0 0 ns t avel address valid to chip enable low 0 0 ns t wlwh write enable pulse width 50 80 ns t eleh chip enable low to chip enable high 55 80 ns t whax write enable high to address transition 0 10 ns t ehax chip enable high to address transition 0 10 ns t dvwh input valid to write enable high 30 50 ns t dveh input valid to chip enable high 30 50 ns t whdx write enable high to input transition 5 5 ns t ehdx chip enable high to input transition 5 5 ns t wlqz (2,3) write enable low to output hi-z 25 50 ns t av wh address valid to write enable high 60 80 ns t av eh address valid to chip enable high 60 80 ns t whqx (2,3) write enable high to output transition 5 10 ns ai00927 tavav tehax tdveh a0-a14 e w dq0-dq7 valid taveh tavel tavwl teleh tehdx data input
9/21 m48z35ay, m48z35av data retention mode with valid v cc applied, the m48z35ay/v operates as a conventional bytewide? static ram. should the supply voltage decay, the ram will au- tomatically power-fail deselect, write protecting it- self when v cc falls within the v pfd (max), v pfd (min) window. all outputs become high imped- ance, and all inputs are treated as ?don't care.? note: a power failure during a write cycle may corrupt data at the currently addressed location, but does not jeopardize the rest of the ram's con- tent. at voltages below v pfd (min), the user can be assured the memory will be in a write protected state, provided the v cc fall time is not less than t f . the m48z35ay/v may respond to transient noise spikes on v cc that reach into the deselect window during the time the device is sampling v cc . there- fore, decoupling of the power supply lines is rec- ommended. when v cc drops below v so , the control circuit switches power to the internal battery which pre- serves data. the internal button cell will maintain data in the m48z35ay/v for an accumulated peri- od of at least 10 years (at 25c) when v cc is less than v so . as system power returns and v cc rises above v so , the battery is disconnected, and the power supply is switched to external v cc . write protec- tion continues until v cc reaches v pfd (min) plus t rec (min). normal ram operation can resume t rec after v cc exceeds v pfd (max). also, as v cc rises, the battery voltage is checked. if the voltage is less than approximately 2.5v, an internal battery not ok (bok ) flag will be set. the bok flag can be checked after power up. if the bok flag is set, the first write attempted will be blocked. the flag is automatically cleared after the first write, and normal ram operation resumes. figure 10 illustrates how a bok check routine could be structured. for more information on battery storage life refer to the application note an1012. figure 10. bok check routine example read data at any address ai00607 is data complement of first read? (battery ok) power-up yes no write data complement back to same address read data at same address again notify system of low battery (data may be corrupted) write original data back to same address (battery low) continue
m48z35ay, m48z35av 10/21 v cc noise and negative going transients i cc transients, including those produced by output switching, can produce voltage fluctuations, re- sulting in spikes on the v cc bus. these transients can be reduced if capacitors are used to store en- ergy which stabilizes the v cc bus. the energy stored in the bypass capacitors will be released as low going spikes are generated or energy will be absorbed when overshoots occur. a ceramic by- pass capacitor value of 0.1f (see figure 11 ) is recommended in order to provide the needed fil- tering. in addition to transients that are caused by normal sram operation, power cycling can generate neg- ative voltage spikes on v cc that drive it to values below v ss by as much as one volt. these negative spikes can cause data corruption in the sram while in battery backup mode. to protect from these voltage spikes, st recommends connecting a schottky diode from v cc to v ss (cathode con- nected to v cc , anode to v ss ). (schottky diode 1n5817 is recommended for through hole and mbrs120t3 is recommended for surface mount). figure 11. supply voltage protection ai02169 v cc 0.1 f device v cc v ss
11/21 m48z35ay, m48z35av maximum rating stressing the device above the rating listed in the ?absolute maximum ratings? table may cause permanent damage to the device. these are stress ratings only and operation of the device at these or any other conditions above those indicat- ed in the operating sections of this specification is not implied. exposure to absolute maximum rat- ing conditions for extended periods may affect de- vice reliability. refer also to the stmicroelectronics sure program and other rel- evant quality documents. table 5. absolute maximum ratings note: 1. for dip package: soldering temperature not to exceed 260c for 10 seconds (total thermal budget not to exceed 150c for longer than 30 seconds). 2. for so package, standard (snpb) lead finish: reflow at peak temperature of 225c (total thermal budget not to exceed 180c fo r between 90 to 150 seconds). 3. for so package, lead-free (pb-free) lead finish: reflow at peak temperature of 260c (total thermal budget not to exceed 245 c for greater than 30 seconds). caution: negative undershoots below ?0.3v are not allowed on any pin while in the battery back-up mode. caution: do not wave solder soic to avoid damaging snaphat sockets. symbol parameter value unit t a ambient operating temperature grade 1 0 to 70 c grade 6 ?40 to 85 c t stg storage temperature (v cc off, oscillator off) snaphat ? ?40 to 85 c soic ?55 to 125 c t sld (1,2,3) lead solder temperature for 10 seconds 260 c v io input or output voltages m48z35ay ?0.3 to 7.0 v m48z35av ?0.3 to 4.6 v v cc supply voltage m48z35ay ?0.3 to 7.0 v m48z35av ?0.3 to 4.6 v i o output current 20 ma p d power dissipation 1 w
m48z35ay, m48z35av 12/21 dc and ac parameters this section summarizes the operating and mea- surement conditions, as well as the dc and ac characteristics of the device. the parameters in the following dc and ac characteristic tables are derived from tests performed under the measure- ment conditions listed in the relevant tables. de- signers should check that the operating conditions in their projects match the measurement condi- tions when using the quoted parameters. table 6. operating and ac measurement conditions note: output hi-z is defined as the point where data is no longer driven. figure 12. ac measurement load circuit note: 50pf for m48z35av. table 7. capacitance note: 1. effective capacitance measured with power supply at 5v. sampled only, not 100% tested. 2. at 25c, f = 1mhz. 3. outputs deselected. parameter m48z35ay m48z35av unit supply voltage (v cc ) 4.5 to 5.5v 3.0 to 3.6 v ambient operating temperature (t a ) grade 1 0 to 70 0 to 70 c grade 6 ?40 to 85 ?40 to 85 c load capacitance (c l ) 100 50 pf input rise and fall times 5 5ns input pulse voltages 0 to 3 0 to 3 v input and output timing ref. voltages 1.5 1.5 v ai03211 c l = 100pf or 5pf c l includes jig capacitance 645 ? device under test 1.75v symbol parameter (1,2) min max unit c in input capacitance 10 pf c io (3) input / output capacitance 10 pf
13/21 m48z35ay, m48z35av table 8. dc characteristics note: 1. valid for ambient operating temperature: t a = 0 to 70c or ?40 to 85c; v cc = 4.5 to 5.5v or 3.0 to 3.6v (except where noted). 2. outputs deselected. 3. negative spikes of ?1v allowed for up to 10ns once per cycle. symbol parameter test condition (1) min max unit i li (2) input leakage current 0v v in v cc 1 a i lo (2) output leakage current 0v v out v cc 5 a i cc supply current outputs open 50 ma i cc1 supply current (ttl standby) e = v ih 3ma i cc2 supply current (cmos standby) e = v cc ? 0.2v 3ma v il (3) input low voltage ?0.3 0.8 v v ih input high voltage 2.2 v cc + 0.3 v v ol output low voltage i ol = 2.1ma 0.4 v v oh output high voltage i oh = ?1ma 2.4 v
m48z35ay, m48z35av 14/21 figure 13. power down/up mode ac waveforms table 9. power down/up ac characteristics note: 1. valid for ambient operating temperature: t a = 0 to 70c or ?40 to 85c; v cc = 4.5 to 5.5v or 3.0 to 3.6v (except where noted). 2. v pfd (max) to v pfd (min) fall time of less than t f may result in deselection/write protection not occurring until 200s after v cc pass- es v pfd (min). 3. v pfd (min) to v ss fall time of less than t fb may cause corruption of ram data. 4. t rec (min) = 20ms for industrial temperature grade (6) device. table 10. power down/up trip points dc characteristics note: 1. all voltages referenced to v ss . 2. valid for ambient operating temperature: t a = 0 to 70c or ?40 to 85c; v cc = 4.5 to 5.5v or 3.0 to 3.6v (except where noted). 3. at 25c, v cc = 0v. symbol parameter (1) min max unit t pd e or w at v ih before power down 0s t f (2) v pfd (max) to v pfd (min) v cc fall time 300 s t fb (3) v pfd (min) to v ss v cc fall time 10 s t r v pfd (min) to v pfd (max) v cc rise time 10 s t rb v ss to v pfd (min) v cc rise time 1s t rec (4) v pfd (max) to inputs recognized 40 200 ms symbol parameter (1,2) min typ max unit v pfd power-fail deselect voltage m48z35ay 4.2 4.35 4.5 v m48z35av 2.7 2.9 3.0 v v so battery back-up switchover voltage m48z35ay 3.0 v m48z35av v pfd ? 100mv v t dr (3) expected data retention time 10 years ai01168c v cc inputs (per control input) outputs don't care high-z tf tfb tr tpd trb tdr valid valid (per control input) recognized recognized v pfd (max) v pfd (min) v so trec
15/21 m48z35ay, m48z35av package mechanical information figure 14. pcdip28 ? 28-pin plastic dip, battery caphat?, package outline note: drawing is not to scale. table 11. pmdip28 ? 28-pin plastic dip, battery caphat?, package mechanical data symb mm inches typ min max typ min max a 8.89 9.65 0.350 0.380 a1 0.38 0.76 0.015 0.030 a2 8.38 8.89 0.330 0.350 b 0.38 0.53 0.015 0.021 b1 1.14 1.78 0.045 0.070 c 0.20 0.31 0.008 0.012 d 39.37 39.88 1.550 1.570 e 17.83 18.34 0.702 0.722 e1 2.29 2.79 0.090 0.110 e3 29.72 36.32 1.170 1.430 ea 15.24 16.00 0.600 0.630 l 3.05 3.81 0.120 0.150 n 28 28 pcdip a2 a1 a l b1 b e1 d e n 1 c ea e3
m48z35ay, m48z35av 16/21 figure 15. soh28 ? 28-lead plastic small outline, battery snaphat, package outline note: drawing is not to scale. table 12. soh28 ? 28-lead plastic small outline, battery snaphat, package mechanical data symbol mm inch typ min max typ min max a 3.05 0.120 a1 0.05 0.36 0.002 0.014 a2 2.34 2.69 0.092 0.106 b 0.36 0.51 0.014 0.020 c 0.15 0.32 0.006 0.012 d 17.71 18.49 0.697 0.728 e 8.23 8.89 0.324 0.350 e1.27? ?0.050? ? eb 3.20 3.61 0.126 0.142 h 11.51 12.70 0.453 0.500 l 0.41 1.27 0.016 0.050 0 8 0 8 n 28 28 cp 0.10 0.004 soh-a e n d c l a1 1 h a cp be a2 eb
17/21 m48z35ay, m48z35av figure 16. sh ? 4-pin snaphat housing for 48mah battery, package outline note: drawing is not to scale. table 13. sh ? 4-pin snaphat housing for 48mah battery, package mechanical data symb mm inches typ min max typ min max a 9.78 0.385 a1 6.73 7.24 0.265 0.285 a2 6.48 6.99 0.255 0.275 a3 0.38 0.015 b 0.46 0.56 0.018 0.022 d 21.21 21.84 0.835 0.860 e 14.22 14.99 0.560 0.590 ea 15.55 15.95 0.612 0.628 eb 3.20 3.61 0.126 0.142 l 2.03 2.29 0.080 0.090 shzp-a a1 a d e ea eb a2 b l a3
m48z35ay, m48z35av 18/21 figure 17. sh ? 4-pin snaphat housing for 120mah battery, package outline note: drawing is not to scale. table 14. sh ? 4-pin snaphat housing for 120 mah battery, package mechanical data symb mm inches typ min max typ min max a 10.54 0.415 a1 8.00 8.51 0.315 0.335 a2 7.24 8.00 0.285 0.315 a3 0.38 0.015 b 0.46 0.56 0.018 0.022 d 21.21 21.84 0.835 0.860 e 17.27 18.03 0.680 0.710 ea 15.55 15.95 0.612 0.628 eb 3.20 3.61 0.126 0.142 l 2.03 2.29 0.080 0.090 shzp-a a1 a d e ea eb a2 b l a3
19/21 m48z35ay, m48z35av part numbering table 15. ordering information scheme note: 1. the soic package (soh28) requires the snaphat ? battery package which is ordered separately under the part number ?m4zxx- br00sh? in plastic tube or ?m4zxx-br00shtr? in tape & reel form (see table 16 ). 2. industrial temperature grade available in soic package (soh28) only. caution : do not place the snaphat battery package ?m4zxx-br00sh? in conductive foam as it will drain the lithium button-cell battery. for other options, or for more information on any aspect of this device, please contact the st sales office nearest you. table 16. snaphat battery table example: m48z 35ay ?70 mh 1 e device type m48z supply voltage and write protect voltage 35ay = v cc = 4.5 to 5.5v; v pfd = 4.2 to 4.5v 35av = v cc = 3.0 to 3.6v; v pfd = 2.7 to 3.0v speed ?70 = 70ns (35ay) ?10 = 100ns (35av) package pc = pcdip28 mh (1) = soh28 temperature range 1 = 0 to 70c 6 (2) = ?40 to 85c shipping method for soh28: blank = tubes (not for new design - use e) e = lead-free package (eco pack ? ), tubes f = lead-free package (eco pack ? ), tape & reel tr = tape & reel (not for new design - use f) for pcdip28: blank = tubes part number description package m4z28-br00sh lithium battery (48mah) snaphat sh m4z32-br00sh lithium battery (120mah) snaphat sh
m48z35ay, m48z35av 20/21 revision history table 17. revision history date version revision details september 1999 1.0 first issue 20-apr-00 1.1 sh and sh28 packages for 2-pin and 2-socket removed 22-jun-01 2.0 reformatted; added temperature information (table 7 , 8 , 3 , 4 , 9 , 10 ) 05-jul-01 2.1 removed reference to ?crystal? in features summary 17-dec-01 2.2 changed speed grade designator to ??10? (table 15 ) 29-may-02 2.3 modified reflow time and temperature footnotes (table 5 ) 03-oct-02 2.4 update v cc for supply voltage (table 5 ) 07-nov-02 2.5 update absolute maximum ratings (table 5 ) 02-apr-03 3.0 v2.2 template applied; test condition updated (table 10 ) 24-mar-04 4.0 reformatted; updated lead-free information (table 5 , 15 )
21/21 m48z35ay, m48z35av information furnished is believed to be accurate and reliable. however, stmicroelectronics assumes no responsibility for the co nsequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of stmicroelectronics. specifications mentioned in this publicati on are subject to change without notice. this publication supersedes and replaces all information previously supplied. stmicroelectronics prod ucts are not authorized for use as critical components in life support devices or systems without express written approval of stmicroelectro nics. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2004 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - italy - japan - malaysia - malta - morocco - singapore - spain - sweden - switzerland - united kingdom - united states www.st.com

▲Up To Search▲

Price & Availability of M48Z35AV-10MH6TR

	To Download M48Z35AV-10MH6TR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .